BS ISO 23337:2016规定了一种使用 改进的兰伯恩试验机。由两个轴承之间的圆周速度差引起的滑动所造成的磨损损失 圆盘形橡胶试件和砂轮，驱动它们独立旋转 它们的周长由规定的载荷相互挤压而确定。测试结果 可报告为每次磨损试验时间或运行距离的体积损失，和/或磨损 与参考化合物相比的阻力指数。由于改进后的兰伯恩试验机能够设置各种研磨条件，例如打滑 速率、滑动速度和负载独立，该方法适用于评估 一系列橡胶产品，尤其是轮胎，在各种恶劣条件下。一个例子 轮胎胎面橡胶的测试见附录A。交叉引用:ISO 525ISO 2781ISO 8486-1ISO 18899:2013ISO 23529ISO/TR 9272ISO 23794:2015购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS ISO 23337:2016 specifies a method for the determination of the resistance of rubber to abrasion using the Improved Lambourn test machine.The abrasion loss resulting from the slip caused by the difference in circumferential speed between a disc-shaped rubber test piece and an abrasive wheel, which are driven to rotate independently with their circumferences pressed against each other by a specified load, is determined. The test result can be reported as a volume loss per abrasion test time or running distance, and/or as an abrasion resistance index compared to a reference compound.As the Improved Lambourn test machine is capable of setting various abrasive conditions, such as slip rate, sliding speed and load, independently, this method is suitable for the evaluation of compounds for a range of rubber products, especially tyres, under a wide range of severity conditions. An example of the testing of tyre tread rubber is given in Annex A.Cross References:ISO 525ISO 2781ISO 8486-1ISO 18899:2013ISO 23529ISO/TR 9272ISO 23794:2015All current amendments available at time of purchase are included with the purchase of this document.