首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM E1569-09
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique (Withdrawn 2018) 通过惰性气体融合技术测定钽粉中的氧的标准测试方法
发布日期: 2009-01-01
废止日期: 2018-01-18
1.1本试验方法涵盖了钽粉中氧的测定,浓度为0.05%-0.50%。 1.2以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 ====意义和用途====== 本试验方法主要用于测试是否符合成分规范。假设所有使用这种方法的人都是经过培训的分析员,能够熟练、安全地执行常见的实验室程序。预计这项工作将在配备适当的实验室中进行。
1.1 This test method covers the determination of oxygen in tantalum powder in concentrations from 0.05 % to 0.50 %. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== This test method is primarily intended as a test for compliance with compositional specifications. It is assumed that all who use this method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory.
分类信息
关联关系
研制信息
归口单位: E01.06
相似标准/计划/法规
现行
ASTM C1494-13(2024)
Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
氮化硅粉末中碳、氮和氧质量分数测定的标准试验方法
2024-09-01
现行
ASTM D5599-22
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
用气相色谱法和氧选择性火焰离子化检测法测定汽油中氧化物的标准试验方法
2022-04-01
现行
SH/T 0720-2002
汽油中含氧化合物测定法(气相色谱及氧选择性火焰离子化检测器法)
Standard test method for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection
2002-05-31
现行
ASTM D5975-17(2025)
Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
测量耗氧量测定堆肥稳定性的标准试验方法
2025-11-01
现行
ASTM C1453-19
Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
核能级二氧化铀粉末和颗粒的点火和铀氧(O/U)原子比测定铀的标准测试方法
2019-07-01
现行
BS EN 725-3-2007
Advanced technical ceramics. Methods of test for ceramic powders-Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas
高级技术陶瓷 陶瓷粉末的试验方法 载气热萃取法测定非氧化物中的氧含量
2008-10-31
现行
ASTM E2050-17(2026)
Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
通过燃烧测定模具粉末中总碳的标准测试方法
2026-01-01
现行
ASTM G124-18
Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
富氧大气中金属材料燃烧性能测定的标准试验方法
2018-11-01
现行
ASTM E2575-19
Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
用惰性气体熔融法测定铜和铜合金中氧的标准试验方法
2019-06-15
现行
ASTM D5622-24
Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
用还原热解法测定汽油和甲醇燃料中总氧的标准试验方法
2024-05-01
现行
ASTM G86-17(2025)
Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
测定环境液体氧和加压液体和气态氧环境中材料对机械冲击的点火灵敏度的标准测试方法
2025-07-01
现行
UNE-EN 725-3-1995
ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 3: DETERMINATION OF THE OXYGEN CONTENT OF NON-OXIDES BY THERMAL EXTRACTION WITH A CARRIER GAS.
高级技术陶瓷 陶瓷粉末的试验方法 第3部分:用载气热萃取法测定非氧化物中的氧含量
1995-04-20
现行
DIN EN 725-3-2007-04
Hochleistungskeramik - Prfverfahren fr keramische Pulver - Teil 3: Bestimmung des Sauerstoffgehaltes in Nichtoxid-Pulvern mittels Trgergasheiextraktion
高级工业陶瓷.陶瓷粉的试验方法.第3部分:用载气热萃取法测定非氧化物中的氧含量;德文版EN 725-3:2007
2007-04-01
现行
NB/SH/T 0986-2019
汽油、柴油和甲醇燃料中总氧含量的测定 还原裂解法
Standard test method for determination of total oxygen in gasoline,diesel and methanol fuels by reductive pyrolysis
2019-06-04
现行
ASTM E1409-13(2021)
Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
用惰性气体熔化法测定钛和钛合金中氧和氮的标准试验方法
2021-12-01
现行
ASTM D7481-18
Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
用量筒测定粉末松装和抽头堆积密度的标准试验方法
2018-06-01
现行
SH/T 0769-2005
石油产品、烃类及烃类-含氧化合物混合物蒸气压测定法(三级膨胀法)
Standard test method for determination of vapor pressure of petroleum products, hydrocarbon, and hydrocarbon-oxygenate mixtures (Triple expansion method)
2005-09-23
现行
ULC 135
Standard Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
使用耗氧量热仪(锥形量热仪)测定建筑材料燃烧性参数的标准试验方法 包括修改件1(ULC-S135:2004-AM1-R2016)
2004-07-01
现行
ASTM D7754-23
Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
用多维气相色谱法测定汽车火花点火式发动机燃料中微量氧的标准试验方法
2023-11-01
现行
NB/SH/T 0972-2018
SAPO-11分子筛晶胞参数的测定 粉末X射线衍射法
standard test method for determination of lattice parameters of zeolite SAPO-11 by powder X -ray diffractometry
2018-10-29