IEC 60335-2-96:2019 RLV包含IEC官方国际标准及其红线版本。Redline版本不是官方文档，它只有英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 IEC 60335-2-96:2019涉及打算安装在1.2米以下和2.3米以上的地板和墙壁以及天花板中的柔性片状加热元件的安全性，其额定电压对于单相装置不超过250 V，对于其他装置不超过480 V。 根据说明书，柔性片加热元件被转换成加热单元，这些加热单元被结合到建筑物中，之后达到所需的危险防护水平。提请注意以下事实: -在许多国家，适用不同的接线规则； -对于打算用于车辆或船舶或飞机上的加热装置，可能需要额外的要求； -在许多国家，国家消防当局、国家建筑条例当局、国家卫生当局、国家劳动保护当局和类似当局规定了额外的要求。 本标准不适用于: -专门用于工业目的的加热装置； -打算在有特殊条件的地方使用的加热装置，例如存在腐蚀性或爆炸性气氛（灰尘、蒸汽或气体）； -毯子、垫子、衣服和类似的柔性加热器具（IEC 60335-2-17); -暖脚器和加热垫(IEC 60335-2-81)； -加热地毯和安装在可拆卸地板覆盖物下的用于房间加热的加热单元（IEC 60335-2-106）； -结合在其他器具中的柔性片加热元件。 这第二版取消并取代了2002年出版的第一版，修正案1:20 03和修正案2:20 08。本版构成技术修订版。 与第一版相比，此版本包括以下重大技术变更: -使文本与IEC 60335-1:20 10及其修正案1和2保持一致； -一些注释已转换为规范性文本或删除（5.6、7.12.1、10.1、11.2.10 3、13.1、13.2、16.2、16.3、18.101、18.102.5、21.1、22.103、22.105、22.106）； -对打算安装在地板上的装有绝缘电线的加热装置的强度测试进行了修改（21。103); -增加了安装在高度低于1.2 m的墙壁中的加热装置的范围和具体要求（6.2、7.1、7.12.1、7.12.6、7.101、11.2、19.2、22.106、24.102，附件AA）。

IEC 60335-2-96:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 60335-2-96:2019 deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations.
Flexible sheet heating elements are converted into heating units that are incorporated in the building in accordance with the instructions after which the required level of protection against hazards is achieved. Attention is drawn to the fact that:
– in many countries, different wiring rules apply;
– for heating units intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national authorities for fire protection, the national authorities for building regulations, the national health authorities, the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to:
– heating units intended exclusively for industrial purposes;
– heating units intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– blankets, pads, clothing and similar flexible heating appliances (IEC 60335-2-17);
– foot warmers and heating mats (IEC 60335-2-81);
– heated carpets and for heating units for room heating installed under removable floor coverings (IEC 60335-2-106);
– flexible sheet heating elements incorporated in other appliances.
This second edition cancels and replaces the first edition published in 2002, Amendment 1:2003 and Amendment 2: 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the first edition:
– aligns the text with IEC 60335-1:2010, and its Amendments 1 and 2;
– some notes have been converted to normative text or deleted (5.6, 7.12.1, 10.1, 11.2.103, 13.1, 13.2, 16.2, 16.3, 18.101, 18.102.5, 21.1, 22.103, 22.105, 22.106);
– the strength test for heating units incorporating insulated wires intended to be installed in floors has been modified a (21.103);
– the scope and specific requirements have been added for heating units installed in walls below a height of 1,2 m (6.2, 7.1, 7.12.1, 7.12.6, 7.101, 11.2, 19.2, 22.106, 24.102, Annex AA).