IEC 60335-2-62:2019 RLV包含官方IEC国际标准及其红线版本。Redline版本不是官方文档，它只有英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 IEC 60335-2-62:2019涉及商用厨房中使用的电动商用冲洗水槽的安全性，对于连接在一相和中性线之间的单相电器，其额定电压不超过250 V，对于其他电器，其额定电压不超过480 V。这些器具例如用于餐馆、食堂、医院和商业企业如面包店、肉店等的厨房。利用其他形式能量的电器的电气部分也在本标准的范围内。在可行的情况下，本标准涉及这些类型的器具带来的常见危害。提请注意以下事实: -对于拟用于车辆或船舶或飞机上的器具，可能需要附加要求； -对于拟在热带国家使用的器具，可能需要特殊要求； -在许多国家，国家卫生当局、负责劳动保护的国家当局、国家供水当局和类似当局规定了额外的要求。 本标准不适用于: -主要设计用于按照临床标准消毒的器具； -洗碗机(IEC 60335-2-58)； -专为工业用途而设计的器具； -拟在有特殊条件的地方使用的器具，例如存在腐蚀性或爆炸性环境（灰尘、蒸汽或气体）。本第四版取消并取代2002年出版的第三版及其修正案1:20 08。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: -指示可触及部件和水的特定温度值，并使文本与IEC 60335-1第5版及其修正案1和2保持一致； -需要应用测试探针12来验证对带电部件的访问（8.101）； -预见到使用特定的测试探针来测量可接近表面的温度(11.3)； -洗涤容器(11.8)； -对定义功耗小于1kW的电器的值的漏电流的修改(13.2)； -增加关于用于电气连接和接地连续性连接的螺钉类型的具体要求（第28条）；-增加了关于热带气候下使用的电器泄漏电流的信息性附件P。 本第2部分应与最新版本的IEC 60335-1及其修正案一起使用。它是在该标准第五版（2010年）的基础上建立的。

IEC 60335-2-62:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60335-2-62:2019 deals with the safety of electrically operated commercial rinsing sinks used in commercial kitchens, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. These appliances are used for example in kitchens of restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that:
- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
- for appliances intended to be used in tropical countries, special requirements can be necessary;
- in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to:
- appliances designed primarily for sterilizing to clinical standards;
- dishwashers (IEC 60335-2-58);
- appliances designed exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This fourth edition cancels and replaces the third edition published in 2002 and its Amendment 1:2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- indicates specific values for temperatures for accessible parts and water and aligns the text with IEC 60335-1, Edition 5, and its Amendments 1 and 2;
- requires the application of test probe 12 for the verification of access to live parts (8.101);
- foresees the use of a specific test probe for the measurements of temperatures of accessible surfaces (11.3);
- washing vessel (11.8);
- modification on leakage current defining the value for appliances with a power consumption less than 1 kW (13.2);
- addition of specific requirements concerning types of screws to be used for electrical connections and connections for earth continuity (Clause 28);
- addition of informative Annex P dealing with leakage currents for appliances used in tropical climates.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.